VoltX Indevolt PowerFlex 3000 AC Off-Peak Smart Power Station, Expandable 2kWh to 12kWh, 1000W-3000W LiFePO4

Meet the VoltX Indevolt PowerFlex 3000

Looking for a power station without solar? This one’s for you.

Introducing the VoltX Indevolt PowerFlex 3000, a new tool to store off-peak electricity for use when it matters.

Built to run as an off-peak power station, it charges from a suitable AC socket when electricity is cheap or free, then sends that stored electricity back when rates climb. Because it fills up from mains power alone, there are no panels or switchboard upgrade to worry about.

Who It’s For

• Apartment dwellers, renters, and unit owners using a standard AC connection
• Time-of-use customers with free, off-peak, or lower-rate periods, charging cheap and using it later
• Fixed essential loads: garage freezers, second fridges, routers, NBN equipment, CCTV, and lighting
• Small-business selected loads: display fridges, POS, routers, and CCTV

The Off-Peak Playbook

The logic is straightforward: fill up while electricity is cheapest, then lean on it once rates climb. From the app, you can set a 95% depth of discharge (DoD), so a reserve stays on standby for the next outage. Charge level, discharge, and status all sit a tap away on your phone, so you’re never guessing where things stand.

Start Small, Scale When You’re Ready

It’s an expandable power station, so you can buy the capacity you need for now. Begin with the base 2016Wh power station. Scale up to 12kWh by adding compatible battery modules, sold separately:

• Power Module only: 1000W, 2kWh
• Power Module + 1 Battery Module: 2000W, 4kWh
• Power Module + 2 Battery Modules: 3000W, 6kWh
• Power Module + 3 Battery Modules: 3000W, 8kWh
• Power Module + 4 Battery Modules: 3000W, 10kWh
• Power Module + 5 Battery Modules: 3000W, 12kWh

Stack with Confidence

Before you add battery modules, make sure the spot can take the full stack, with clear airflow for heat dissipation and at least 30mm behind the heatsink. Stack, secure, and remove modules by the user manual, and switch off and disconnect AC input every time you’re adding or removing a module.

Built for the Long Haul

At the heart of this LiFePO4 power station is premium LiFePO4 chemistry rated for up to 8000 cycles and smart BMS monitoring. It’s covered by a 10-year Australian warranty with local after-sales support.